Enabling Z-Wave environmental control

Mind Express supports for Z-Wave only lighting and sockets.

  1. Close Mind Express.
  2. Connect a Z-Wave controller to your Mind Express device's USB port.
    Note: A Z-Wave controller is already integrated in some Jabbla devices. Please refer to your device's manual.
  3. Open Mind Express.
  4. Choose Menu > Settings.
  5. Choose Environmental control.
    The Configuration tab appears.
  6. In Use Z-Wave, choose Yes.
    Z-Wave is enabled. If required, you will still need to select the Com port from the drop-down list.
  7. Choose OK.